| 1 |
$950 |
STIHL TS700 Gas Demo Saw,
with cart and water system |
| 2 |
$950 |
STIHL TS700 Gas Demo Saw,
with cart and water system |
| 3 |
$400 |
STIHL TS400 Gas Demo Saw |
| 4 |
$200 |
STIHL TS360 Gas Demo Saw |
| 5 |
$175 |
STIHL TS360 Gas Demo Saw |
| 6 |
$200 |
STIHL TS360 Gas Demo Saw |
| 7 |
$175 |
STIHL TS360 Gas Demo Saw |
| 8 |
$400 |
Demo Saw Blades |
| 9 |
$50 |
Abrasive Saw Blades |
| 10 |
$75 |
MCCULLOCH MS1838AV Gas
Chain Saw (SALES TAX) |
| 11 |
$75 |
MCCULLOGH MS1838AV Gas
Chain Saw (SALES TAX) |
| 12 |
$175 |
STIHL 036 Gas Chain Saw |
| 13 |
$75 |
STIHL 036 Gas Chain Saw |
| 13A |
$45 |
(2 Pair) Chain Saw Chaps |
| 14 |
$10 |
Demo Saw Cart |
| 15 |
$10 |
Demo Saw Cart |
| 16 |
$200 |
2-Man Auger, Briggs &
Stratton 5HP gas (SALES TAX) |
| 17 |
$110 |
JOHN DEERE 3 Gas Edger
(SALES TAX) |
| 18 |
$1,200 |
MIKASA MT-75HS Gas Foot
Compactor |
| 19 |
$1,100 |
MIKASA MT-75HS Gas Foot
Compactor |
| 20 |
$1,200 |
MIKASA MT-74F Gas Foot
Compactor |
| 21 |
$1,100 |
WACKER Gas Foot Compactor |
| 22 |
$350 |
WACKER BS45Y Gas Foot
Compactor (SALES TAX) |
| 23 |
$125 |
STONE VR14 Gas Foot
Compactor (SALES TAX) |
| 24 |
$800 |
MIKASA MVC-88GHW Gas Plate
Compactor |
| 25 |
$600 |
MIKASA MVC-88GHW Gas Plate
Compactor |
| 26 |
$1,200 |
MIKASA MVC77H Gas Plate
Compactor |
| 27 |
$950 |
MIKASA MVC90H Gas Plate
Compactor |
| 28 |
$225 |
Gas Plate Compactor |
| 29 |
$125 |
DEVILBISS 12 Gallon
Electric Air Compressor (SALES TAX) |
| 30 |
$450 |
YAMAHA YG6600DE Generator,
electric start |
| 31 |
$475 |
YAMAHA YG4600D Gas
Generator (SALES TAX) |
| 32 |
$225 |
STOW Vibratory Screed,
Briggs & Stratton 3HP gas, with 14' aluminum screed (SALES TAX) |
| 33 |
$300 |
WYCO Electric Concrete
Vibrator |
| 34 |
$50 |
HOMELITE Electric Concrete
Vibrator (SALES TAX) |
| 35 |
$200 |
STOW Electric Concrete
Vibrator (SALES TAX) |
| 36 |
$325 |
FORNEY Press-Aire Meter |
| 37 |
$30 |
Volumeter |
| 38 |
$450 |
KENT 60# Pneumatic Paving
Breaker |
| 39 |
$450 |
KENT 60# Pneumatic Paving
Breaker (SALES TAX) |
| 40 |
$450 |
KENT 60# Pneumatic Paving
Breaker (SALES TAX) |
| 41 |
$300 |
60# Pneumatic Paving
Breaker (SALES TAX) |
| 42 |
$300 |
60# Pneumatic Paving Breaker
(SALES TAX) |
| 43 |
$50 |
60# Pneumatic Paving
Breaker (SALES TAX) |
| 44 |
$50 |
INGERSOLL RAND 60#
Pneumatic Paving Breaker (SALES TAX) |
| 45 |
$375 |
Pneumatic Paving Breaker
(SALES TAX) |
| 46 |
$325 |
KENT Pneumatic Chipping
Hammer and steel (SALES TAX) |
| 47 |
$425 |
Pneumatic Drill (SALES TAX) |
| 48 |
$375 |
Pneumatic Drill (SALES TAX) |
| 49 |
$350 |
Pneumatic Tamper (SALES
TAX) |
| 50 |
$175 |
Breaker Steel (SALES TAX) |
| 51 |
$175 |
Breaker Steel (SALES TAX) |
| 52 |
$525 |
Drill Steel (SALES TAX) |
| 53 |
$200 |
(5) Pneumatic Oilers (SALES
TAX) |
| 54 |
$55 |
Electric Band Saw (SALES
TAX) |
| 55 |
$525 |
LINCOLN LN-25 Wire Feed
Welder (SALES TAX) |
| 56 |
$350 |
Oxygen/Acetylene Torch Set
(SALES TAX) |
| 57 |
$350 |
Oxygen/Acetylene Torch Set
(SALES TAX) |
| 57A |
$825 |
TITAN Sandblast Pot (SALES
TAX) |
| 58 |
$25 |
Testing Sieves (SALES TAX) |
| 59 |
$100 |
Gas Meter |
| 60 |
$800 |
LASERMARK LM800 Rotary
Laser, with tripod |
| 61 |
$275 |
CST/BERGER 24X Auto Level,
with tripod |
| 62 |
$275 |
CST/BERGER 24X Auto Level,
with tripod |
| 63 |
$200 |
CST/BERGER 24X Auto Level,
with tripod |
| 64 |
$200 |
CST/BERGER 24X Auto Level,
with tripod |
| 65 |
$200 |
CST/BERGER 24X Auto Level,
with tripod |
| 66 |
$150 |
CST/BERGER 24X Auto Level |
| 67 |
$150 |
CST/BERGER 24X Auto Level |
| 68 |
$550 |
Transit (SALES TAX) |
| 69 |
$5 |
Tripods (SALES TAX) |
| 70 |
$850 |
Cordless Rebar Tier |
| 71 |
$850 |
Cordless Rebar Tier |
| 72 |
$425 |
BOSCH 11236VS Hammer Drill
(SALES TAX) |
| 73 |
$150 |
BOSCH Bull Dog XTreme Hammer Drill |
| 74 |
$100 |
SNAP-ON Torque Wrench |
| 75 |
$100 |
SNAP-ON Torque Wrench |
| 76 |
$100 |
SNAP-ON Torque Wrench |
| 77 |
$100 |
SNAP-ON Torque Wrench |
| 78 |
$45 |
CRAFTSMAN 3/8"
Electric Drill |
| 79 |
$0 |
KAWASAKI 1/2" Electric
Impact Wrench |
| 80 |
$25 |
SKILSAW 7-1/4"
Circular Saw |
| 81 |
$25 |
BOSCH 7-1/4" Circular
Saw |
| 82 |
$20 |
CRAFTSMAN 7-1/4"
Circular Saw |
| 83 |
$35 |
CRAFTSMAN Cordless Tool Set |
| 84 |
$75 |
CRAFTSMAN Cordless Tool Set |
| 85 |
$15 |
CRAFTSMAN Cordless Tool Set |
| 86 |
$5 |
BLACK & DECKER Cordless
Tool Set |
| 87 |
$1,700 |
LINCOLN Ranger 9 Welder
Generator, Onan Performer 18 gas (SALES TAX) |
| 88 |
$1,600 |
LINCOLN Ranger 9 Welder
Generator, Onan Performer 18 gas (SALES TAX) |
| 89 |
$1,000 |
LINCOLN Ranger 8 Welder
Generator, Onan Performer 16 gas (SALES TAX) |
| 90 |
$2,700 |
LINCOLN SA250 Welder
Generator, 3 cylinder diesel (SALES TAX) |
| 91 |
$700 |
Welding Leads (SALES TAX) |
| 92 |
$900 |
EMGLO GCU Air Compressor,
Honda 8HP gas (SALES TAX) |
| 93 |
$4,100 |
#307 TARGET Model Pro 65 II
Walk Behind 36" Concrete Saw, s/n 186101, powered by Wisconsin 4
cylinder gas engine. (Purchased New) (SALES TAX) |
| 94 |
$775 |
UNUSED 30" Concrete
Saw Blade (SALES TAX) |
| 95 |
$400 |
36" Concrete Saw Blade
(SALES TAX) |
| 96 |
$225 |
30" Concrete Saw Blade
(SALES TAX) |
| 97 |
$1,750 |
#317 1997 CASE Model TL-60
Walk-Behind Trencher, powered by Honda 13HP gas engine and hydrostatic
transmission, equipped with 46" trencher bar and pneumatic tires. In
good condition with good tires. (Purchased New) (SALES TAX) |
| 98 |
$1,800 |
#321 REINCO Model TMJR Skid
Mounted Straw Blower, s/n 1773, powered by Briggs & Stratton 18HP gas
engine. In good condition. (Purchased New) (SALES TAX) |
| 99 |
$25 |
3-Point Hitch Mulching
Attachment (SALES TAX) |
| 100 |
$5,500 |
#262 1990 INGERSOLL RAND
185 CFM Portable Air Compressor, s/n 184904U90329, powered by John Deere diesel
engine. In good condition with good tires. (Meter Reads 997 Hours) (Purchased
New) (SALES TAX) |
| 101 |
$4,500 |
#183 1986 INGERSOLL RAND
Model P-185-A-W-JD, 185 CFM Portable Air Compressor, s/n 155831U86957,
powered by John Deere diesel engine. In good condition with good tires.
(Meter Reads 2,565 Hours) (Purchased New) (SALES TAX) |
| 102 |
$3,500 |
#202 1986 INGERSOLL RAND
130 CFM Portable Air Compressor, s/n 156872U86173, powered by John Deere
diesel engine. In good condition with good tires. (Meter Reads 1,679 Hours)
(Purchased New) (SALES TAX) |
| 103 |
$6,000 |
#469 2006 INGERSOLL RAND
Model Light Source Portable Light Plant, s/n 368733UCQ789, powered by Kubota
diesel engine, equipped with manual raise, (4) lights, (4) manual
stabilizers, and 175/80D13 tires. In good condition with good tires. (Meter
Reads 00,174 Hours) (Purchased New) |
| 104 |
$2,500 |
#314 COLEMAN Model
CK19V17SQ, 17KW/21KVA Portable Generator, s/n 5962430, powered by Kubota
V1903-EBG diesel engine, single phase/3 phase selector, 120/240V. In good
condition with good tires. (Meter Reads 12,847 Hours) (Purchased New) |
| 105 |
$400 |
#241 PROTECT-O-FLASH
Portable Arrowboard, powered by Lister Petter
diesel engine. In fair condition. (4,758 Hours) (SALES TAX) |
| 106 |
$450 |
#242 PROTECT-O-FLASH
Portable Arrowboard, powered by Lister Petter
diesel engine. In fair condition. (4,863 Hours) (SALES TAX) |
| 107 |
$75 |
PROTEC-O-FLASH Truck
Mounted Arrowboard (SALES TAX) |
| 108 |
$4,750 |
#382 2002 ZOOKS Tandem Axle
Tag-A-Long Water Trailer, VIN# 1Z9BU2163ZL999334, equipped with 12' level
deck, mesh sides, electric brakes, 1,000 gallon poly tank, Honda 2" gas
powered pump, 10,000# GVWR and 225/75R15 tires. In good condition with good
tires. (Purchased New) |
| 109 |
$1,750 |
#288 1992 CRONKHITE Tandem
Axle Tag-A-Long Trailer, VIN# 473262129N1110774, 6'x17' level deck, 5' ramp,
12,300# GVWR, and 225/75R15 tires. In good condition with good tires. (TITLE
DELAY) |
| 110 |
$500 |
#318 1997 DOOLITTLE 12'
Single Axle Tag-A-Long Trailer, VIN# 1DGRS1212VM028137, with 50" ramp
and 205/75R15 tires. In good condition with good tires. |
| 111 |
$450 |
1987 MGS Tandem Axle
Tag-A-Long Trailer, VIN# 16MB11023HD013724, equipped with 5'x10' level deck,
4'6" ramp, and 18.5x8.5x8 tires. In good condition with good tires. |
| 112 |
$40,000 |
#476 2008 CHEVROLET Model
C4500 Single Axle Crew Cab Utility Truck, VIN# 1GBE4E1968F416555, powered by
GM 6.6L diesel engine and automatic transmission, equipped with 9' open
utility body, (2) 100 gallon fuel tanks with electric pumps, tow package,
dual rear wheels, dual fuel tanks, power windows and locks, power heated
mirrors, running boards, and 225/70R19.5 tires. In good to very good
condition with fair to good tires. (Odometer Reads 56,314 Miles) (Purchased
New) |
| 113 |
$36,500 |
#490 2011 GMC Model 3500HD
Crew Cab Utility Truck, VIN# 1GD412CL9BF140303, powered by Duramax 6.6L
diesel engine and automatic transmission, equipped with 9' open utility body,
(2) 100 gallon fuel tanks with electric pumps, tow package, dual rear wheels,
power windows, locks, and mirrors, air conditioning, cruise control, and 235/80R17
tires. In good to very good condition with good tires. (Odometer Reads 32,681
Miles) (Purchased New) |
| 114 |
$18,000 |
#433 2007 FORD Model
F-450XL Super Duty Crew Cab Utility Truck, VIN# 1FDXW46P87EB39150, powered by
Power Stroke 6.0L diesel engine and automatic transmission, equipped with 9'
open utility body, (2) 100 gallon fuel tanks with electric pumps, tow
package, dual rear wheels, running boards, and 225/70R19.5 tires. In good to
very good condition with good to very good tires. (Odometer Reads 082,256
Miles) (Purchased New) |
| 115 |
$18,000 |
#432 2007 FORD Model
F-450XL Super Duty Crew Cab Utility Truck, VIN# 1FDXW46P17EB39149, powered by
Power Stroke 6.0L diesel engine and automatic transmission, equipped with 9'
open utility body, (2) 100 gallon fuel tanks with electric pumps, tow
package, dual rear wheels, running boards, air conditioning, and 225/70R19.5
tires. In good condition with good tires. (Odometer Reads 131,444 Miles)
(Purchased New) |
| 116 |
$2,500 |
#215 1987 CHEVROLET Model
70 Single Axle Utility/Service Truck, VIN# 1GBL7D1G0HV112067, powered by V-8
diesel engine and 5 speed transmission with 2 speed rear, equipped with 11'
walk-in utility body, tow package, and 10.00R20 tires. In good condition with
good tires. (Odometer Reads 072,228 Miles) (Purchased New) |
| 117 |
$6,000 |
#139 1975 FORD Model 900
Single Axle Fuel Truck, VIN# N90KVX06015, powered by 8 cylinder gas engine
and 5 speed transmission with 2 speed rear, equipped with 2,000 gallon
2-compartment (1000/1000) aluminum fuel body, electric winding hose reel and
meter, 35,000# GVWR, and 11.00x20 tires. In fair condition with good tires.
(Odometer Reads 37,389 Miles) |
| 118 |
$2,250 |
#373 2002 FORD Model E-350
Super Duty Cargo Van, VIN# 1FTSE34F42HA12392, powered by Power Stroke 7.3L
diesel engine and automatic transmission, equipped with sliding door,
security cage, tow package, air conditioning, cruise control, and power
windows and locks. In good condition with good to very good tires. (Odometer
Reads 211,190 Miles) |
| 119 |
$8,000 |
2005 THULE 24' Enclosed Car
Hauler, VIN# 5FGK8242252017813, equipped with aluminum frame, 102" wide,
8' interior width, V-nose drop rear gate, curbside door, (10) tie-downs,
utility light, 7,500# GVWR, 2-5/16" ball, and 225/75R15 tires. In good
to very good condition with good tires. (TITLE DELAY) |
| 120 |
$9,000 |
#495 2005 FREIGHTLINER M2
Business Class Straight Truck, VIN# 1FVACXDCX5HU54729, powered by Cat C-7,
210HP diesel engine and 6 speed transmission, equipped with Morgan
24'x96" aluminum van body with curb side door, rollup rear door, and
Maxon 2,500# lift gate, air brakes, 21,000# rear and 12,000# front axle,
33,000# GVWR, and 11R22.5 tires. In good condition with good tires. (Odometer
Reads 215,084 Miles) |
| 121 |
$10,000 |
#479 2004 FREIGHTLINER
Model M2 Business Class Straight Truck, VIN# 1FVACWAKX4HM65010, powered by
Cat 3126, 190HP diesel engine and Eaton Fuller 6 speed transmission, equipped
with Morgan 24'x96" aluminum van body with rollup rear door, Maxon
2,500# lift gate, air brakes, air conditioning, cruise control, 26,000# GVWR,
and 11R22.5 tires. In good condition with good tires. (Odometer Reads 129,075
Miles) |
| 122 |
$9,000 |
#480 2004 FREIGHTLINER
Model M2 Business Class Straight Truck, VIN# 1FVACWAK54HM66467, powered by
Cat 3126, 190HP diesel engine and Eaton Fuller 6 speed transmission, equipped
with Morgan 24'x102" aluminum van body with rollup rear door, curbside
door, Altco 3,000# lift gate, air brakes, air
conditioning, cruise control, 26,000# GVWR, and 11R22.5 tires. In good
condition with good tires. (Odometer Reads 164,445 Miles) |
| 123 |
$3,500 |
#408 1999 FREIGHTLINER
Model FL60 Single Axle Van Body Truck, VIN# 1FV3GJFCXXHB77111, powered by Cat
3126 175HP diesel engine and 5 speed transmission, equipped with 22'6"
FRP van body with rollup rear door, lift gate, heated mirrors, air
conditioning, cruise control, hydraulic brakes, 25,500# GVWR, and 10.00R22.5
tires. In good condition with good to very good tires. (Odometer Reads
220,923 Miles) |
| 124 |
$3,750 |
#335 1991 INTERNATIONAL
Model 4900 Van Body Truck, VIN# 1HTSDZ4N5MH325017, powered by International
DT466 diesel engine and 5 speed transmission, equipped with 22' aluminum van
body with lift gate, air brakes, heated mirrors, air conditioning, and
295/75R22.5 tires. In good condition with good tires. (Odometer Reads 265,546
Miles) |
| 125 |
$2,100 |
#214 1987 CHEVROLET Model
70 Single Axle Van Body Truck, VIN# 1GBL7D1G0HV112019, powered by Detroit
8.2L diesel engine and 5 speed transmission with 2 speed rear, equipped with
12' aluminum van body with swing rear doors and curbside door, work bumper,
and 10.00R20 tires. In fair to good condition with fair tires. (Odometer
Reads 140,826 Miles) (Purchased New) |
| 126 |
$2,750 |
#224 1984 FORD Model 540B
Utility Tractor, s/n C720370, powered by Ford 60HP diesel engine and direct
drive transmission, equipped with loader attachment, 3-point hitch, PTO, roll
bar, 225/75R16 front and 16.9x24 rear tires. In fair to good condition with
fair to good tires. (Meter Reads 3,505 Hours) (SALES TAX) |
| 127 |
$3,000 |
#090 1981 JOHN DEERE Model
301A Utility Tractor, s/n 243474T, powered by John Deere 43HP diesel engine
and direct drive transmission, equipped with loader attachment, 3-point
hitch, PTO, rear hydraulics, rear wheel weights, 225/75R16 front and 14.9x24
rear tires. In good condition with fair tires. (Meter Reads 3,645 Hours)
(Purchased New) (SALES TAX) |
| 128 |
$4,750 |
#336 1990 JOHN DEERE Model
2155 Broom Tractor, s/n L02155A636290, powered by John Deere 55HP diesel
engine and direct drive transmission, equipped with 6'
hydraulic angle broom, dual rear auxiliary hydraulics, 3-point hitch, PTO,
ROPS post, 215/85R16 front and 14.9x24 rear tires. In good condition with
good tires. (Meter Reads03,129 Hours) (SALES TAX) |
| 129 |
$2,400 |
#156 1980 JOHN DEERE Model
301A Broom Tractor, s/n 341829T, powered by John Deere 43HP diesel engine and
direct drive transmission, equipped with 6' hydraulic broom, 3-point hitch,
PTO, enclosed cab , rear wheel weights, 225/75R16
front and 16.9x24 rear tires. In good condition with fair to poor tires.
(Meter Reads 3,705 Hours) (SALES TAX) |
| 130 |
$5,250 |
#164 1986 JOHN DEERE Model
515B Skip Loader Tractor, s/n 004298, powered by JD diesel engine and shuttle
transmission, equipped with loader attachment, rear attachment hitch, dual
hydraulic outlets, enclosed ROPS cab, (2) outriggers, 12.5/80x18 front and
18.4x30 rear tires. In good condition with fair to good tires. (Meter Reads
3,001 Hours) (Purchased New) (SALES TAX) |
| 131 |
$20,500 |
#338 1998 JOHN DEERE Model
710D, 4x4 Tractor Loader Extend-A-Hoe, s/n 846122, powered by JD diesel
engine and powershift transmission, equipped with general purpose loader
bucket with bolt-on cutting edge, 24" digging bucket, auxiliary
hydraulics, enclosed ROPS cab, 15x19.5 front and 20.5x25 rear tires. In good
condition with very good front and fair rear tires. (Meter Reads 6,557 Hours)
(Purchased New) (Cold Planer Sold Separately) (SALES TAX) |
| 132 |
$1,750 |
ALITEC 18" Cold Planer
and Bits (Fits JD 710) |
| 133 |
$32,000 |
#514 UNUSED 2013 BOMAG
Model BMP8500 Articulated Trench Compactor, s/n 101720113389, powered by
Kubota 20HP diesel engine, equipped with 24" padfoot drums with bolt-on
extensions to 33", radio remote, (2) frequency vibration. (Meter Reads 0,002 Hours) (Purchased
New) (SALES TAX) |
| 134 |
$37,500 |
#515 2010 CATERPILLAR Model
289C Crawler Skid Steer Loader, s/n JMP01058, powered by Cat C3.4 diesel
engine and 2-speed hydrostatic transmission, equipped with 78" GP bucket
with teeth, power coupler, standard auxiliary hydraulics, 8-pin electric,
joystick controls with pattern selector, enclosed ROPS cab with air conditioning,
and 17.5" rubber tracks. In good to very good condition with fair to
good tracks. (Meter Reads 2,284 Hours) (RESERVED FOR USE DURING LOADOUT UNTIL
8/6/14 @ NOON) (SALES TAX) |
| 135 |
$37,500 |
#517 2010 CATERPILLAR Model
299C Crawler Skid Steer Loader, s/n JSP00795, powered by Cat C3.4 diesel
engine and 2-speed hydrostatic transmission, equipped with 84" GP bucket
with teeth, power coupler, auxiliary hydraulics, enclosed ROPS cab with air
conditioning, 8-pin electric, and 17.5" rubber tracks. In good to very
good condition with good tracks. (Meter Reads 2,352 Hours) (SALES TAX) |
| 136 |
$5,000 |
BOBCAT 6B Landscape Rake |
| 137 |
$5,000 |
BOBCAT 6B Landscape Rake |
| 138 |
$4,500 |
BOBCAT 6B Landscape Rake |
| 139 |
$2,750 |
BOBCAT 5B Landscape Rake |
| 140 |
$2,750 |
#375 CAT T9, 5' Trencher
Attachment (SALES TAX) |
| 141 |
$2,250 |
SWEEPSTER 72"
Hydraulic Power Angle Broom |
| 142 |
$2,250 |
BRADCO AB84 Hydraulic Power
Angle Broom |
| 143 |
$6,750 |
CAT CV18B, 72" Smooth
Drum Vibratory Roller |
| 143A |
$900 |
48" Forks (SALES TAX) |
| 144 |
$2,000 |
MI 72" Heavy Duty Grapple
Rake |
| 145 |
$2,000 |
MI 72" Heavy Duty
Grapple Rake |
| 146 |
$900 |
78" Loader Bucket, wit
bolt-on cutting edge |
| 147 |
$900 |
78" Loader Bucket,
with bolt-on cutting edge |
| 148 |
$900 |
72" Loader Bucket,
with bolt-on cutting edge |
| 149 |
$900 |
72" Loader Bucket,
with bolt-on cutting edge |
| 150 |
$1,300 |
RCS Sno-Pro
10' Snow Pusher (SALES TAX) |
| 151 |
$150,000 |
#507 2011 JOHN DEERE Model
624K Rubber Tired Loader, s/n 636453, powered by John Deere 6068HDW79 diesel
engine and powershift transmission with auto shift, JRB left side dump
bucket, JRB hydraulic coupler, auxiliary hydraulics, ride control, spin
control, lockup torque converter, auto diff lock, rear axle disconnect,
enclosed ROPS cab with air conditioning, heated mirrors, and 20.5R25 tires.
In very good condition with good to very good tires. (Meter Reads 1,547
Hours) (Purchased New) (SALES TAX) |
| 152 |
$10,000 |
JRB Right Side Dump Bucket
(624) (SALES TAX) |
| 153 |
$11,000 |
JRB Left Side Dump Bucket
(624) (SALES TAX) |
| 154 |
$10,000 |
JRB Left Side Dump Bucket
(644) (SALES TAX) |
| 155 |
$8,000 |
JRB 72" Hydraulic
Positioning Forks (624) (SALES TAX) |
| 156 |
$8,000 |
JRB 72" Hydraulic
Positioning Forks (624) (SALES TAX) |
| 157 |
$7,500 |
JRB 72" Hydraulic
Positioning Forks (624) (SALES TAX) |
| 158 |
$37,000 |
#390 2000 KOMATSU Model
PC128UU-2 Hydraulic Excavator, s/n 5204, powered by Komatsu diesel engine,
equipped with 7' dipper stick, articulated boom, Komatsu 24" digging
bucket, 98" backfill blade, air conditioning, and 20" street pads.
In good condition with good undercarriage. (Meter Reads 07,586 Hours) (SALES
TAX) |
| 159 |
$35,000 |
#420 2000 KOMATSU Model
PC128UU-2 Hydraulic Excavator, s/n 5251, powered by Komatsu S4D102E-1-A
diesel engine, equipped with 8' dipper stick, articulated boom, 32"
digging bucket, 98" backfill blade, air conditioning, 20" street
pads. In good condition with good undercarriage. (Meter Reads 08,160 Hours) |
| 160 |
$26,000 |
#383 1999 KOMATSU Model
PC128UU-2 Hydraulic Excavator, s/n 5010, powered by Komatsu diesel engine,
equipped with 7' dipper stick, articulated boom, 36" digging bucket with
cutting edge, 96" backfill blade, air conditioning, 20" street
pads. In good condition with good undercarriage. (Meter Reads 8,192 Hours)
(SALES TAX) |
| 161 |
$49,000 |
#436 2001 KOMATSU Model
PC228UU-1 Hydraulic Excavator, s/n 10590, powered by Komatsu diesel engine,
equipped with 9'8" dipper stick with JRB Roto-Loc hydraulic quick
coupler, 24" digging bucket, articulated boom, air conditioning, and
24" street pads. In good condition with good undercarriage. (Meter Reads
04,667 Hours) |
| 162 |
$52,000 |
#450 2000 KOMATSU Model
PC228UU-1 Advance Hydraulic Excavator, s/n 10587, powered by Komatsu diesel
engine, equipped with 9'8" dipper stick with JRB Roto-Loc hydraulic
quick coupler, 40" digging bucket with cutting edge, articulated boom,
air conditioning, and 24" street pads. In good condition with good
undercarriage. (Meter Reads 04,238 Hours) |
| 163 |
$57,500 |
#377 2002 CATERPILLAR Model
320C LU Hydraulic Excavator, s/n CLZ00227, powered by Cat 3066T diesel
engine, equipped with 9'8" dipper stick with Cat variable hydraulic coupler,
dual function auxiliary hydraulics, Tramac auto hammer lube system, Cat
24" digging bucket, reduced tail swing, air conditioning, and 31.5"
pads. In good condition with good undercarriage. (Meter Reads 05,304 Hours)
(Purchased New) (Hammer Sold Separately) (SALES TAX) |
| 164 |
$52,000 |
#331 1998 CATERPILLAR Model
320BL Hydraulic Excavator, s/n 6CR02679, powered by Cat diesel engine
equipped with 9'6" dipper stick with JRB hydraulic quick coupler and
hydraulic beyond, Lincoln auto hammer lube system, 36" digging bucket,
air conditioning, 24" TBG pads, and 14' crawlers. In good condition with
good undercarriage. (09,548 Hours) (Purchased New) (Hammer Sold Separately)
(SALES TAX) |
| 165 |
(see Lot 167) |
#339 1999 JOHN DEERE Model
450LC Hydraulic Excavator, s/n 90335, powered by JD diesel engine, equipped
with 11' dipper stick with JRB hydraulic quick coupler and hydraulic beyond,
Lincoln auto hammer lube system, 48" digging bucket, hydraulic
counterweight removal device, air conditioning, 36" TBG pads. In good
condition with good undercarriage. (Meter Reads 12,686 Hours) (Installed
Remanufactured Engine From Plasterer 8/08 @ 9,562 Hours) (Reserved For Used
During Loadout Until 8/6/14 @ 12 Noon) (Purchased New) (SALES TAX) |
| 166 |
(see Lot 167) |
#501 2010 ANTRAQUIP Model
AQ4-N, 34" Hydraulic Transverse Cutter Head, s/n 141448-3, Hard rock
cutter head with 34" cut, 25-45 ton recommended carrier weight with
50-85 GPM hydraulic flow rate. (Fitted to JD450) (Purchased 2011 As
Manufacturer Reconditioned Unit) |
| 167 |
$62,000 |
Entirety Bid of Lots #165
and #166 (Partial SALES TAX) |
| 168 |
$87,500 |
#435 2006 MIDLAND Model
SPR-6 Road Widener, s/n 113, powered by John Deere 4024T diesel engine and
hydrostatic transmission, equipped with 6' moldboard with hydraulic extension
and grade control, 2.5 Cu. Yd. folding receiving hopper, 15" discharge
conveyor, spray down system, (spare unused belt included), and 255/70R22.5
tires. In good condition with good tires. (Meter Reads 1,066 Hours)
(Purchased New) |
| 169 |
$28,500 |
#417 2005 INGERSOLL RAND/BLAW
KNOX Model PF3020 Crawler Asphalt Paver, s/n 182439, powered by Kubota diesel
engine and hydraulic drive, equipped with Liberty L3000, 8' to 15' heated
vibratory screed, s/n L3000-322, auto feed, dual controls, wash-down system,
and 12" TBG pads with bolt-on street pads. In good to very good
condition with good undercarriage. (Meter Reads 1,157 Hours) (Purchased New) |
| 170 |
$9,500 |
#488 2007 DYNAPAC Model
CC900G Vibratory Roller, s/n 88241631, powered by Honda gas engine and
hydrostatic transmission, equipped with 35" smooth drums, and ROPS post.
In good condition. (Meter Reads 00,182 Hours) (Purchased New) |
| 171 |
$13,000 |
#370 2001 INGERSOLL RAND
Model DD14 Vibratory Roller, s/n 166811, powered by Kubota diesel engine and
hydrostatic transmission, equipped with 35" smooth drums, spray system,
and ROPS post. In good condition. (Meter Reads 01,768 Hours) (Purchased New)
(SALES TAX) |
| 172 |
$13,000 |
#371 2001 INGERSOLL RAND
Model DD14 Vibratory Roller, s/n 167421, powered by Kubota diesel engine and
hydrostatic drive, equipped with 35" smooth drums and ROPS post. (Meter
Reads 2,079 Hours) (Purchased New) (SALES TAX) |
| 173 |
$20,000 |
#518 2006 INGERSOLL RAND
Model DD-90HF Tandem Vibratory Roller, s/n 186392, powered by Cummins B3.9
diesel engine and hydrostatic transmission, equipped with 66" smooth
drums, dual frequency vibration, swing controls, water system, and ROPS
canopy. In good condition. (Meter Reads 06,897 Hours) (SALES TAX) |
| 174 |
$10,000 |
#238 1985 INGERSOLL RAND
Model DA-48 Vibratory Roller, s/n 5231S, powered by Cat 3204 diesel engine
and hydrostatic transmission, equipped with 66" smooth drums, dual
frequency vibration, and spray system. In good condition. (Meter Reads 5,309
Hours) (SALES TAX) |
| 175 |
$38,000 |
#460 2004 ASPHALT ZIPPER
Model AZ-480S Milling Attachment, s/n 48S00110, VIN# 109FS08274U022544,
powered by JD diesel engine with Twin Disc PTO, equipped with 48" cutter
drum, mounted on model BT0010 tandem axle carrier with 225/75D15 tires. In
good condition with good tires. (Meter Reads 320 Hours) (SALES TAX) |
| 175A |
$1,000 |
TANDEM AXLE TRAILER, VIN#
109FS08274U022544 (ASPHALT ZIPPER CARRIER) |
| 176 |
$28,000 |
#369 2001 ASPHALT ZIPPER
Model AZ360 Milling Attachment, s/n 100723, VIN# 109FS10151U021557, powered
by JD diesel engine and Twin Disc PTO, equipped with 36" cutting drum,
mounted on single axle trailer with 9.50x16.5LT tires. In good condition with
good tires. (Meter Reads 651 Hours) (Less Than 200 Hours on New Drum)
(Purchased New) (SALES TAX) |
| 176A |
$1,000 |
2001 WILLIAMSON SINGLE AXLE
TRAILER, VIN# 109FS10151U021557 (ASPHALT ZIPPER CARRIER) |
| 177 |
$17,000 |
#416 2006 MARATHON Portable
Crack Filler, powered by Kubota ACTV diesel engine, equipped with 400 gallon
propane heated tank, electric overnight heater, hydraulic agitator, mounted
on 2006 Marathon model TRA/REM tandem axle carrier, VIN# 2M9DMK2T96H102021,
with 225/75R15 tires. In good condition with good tires. (Meter Reads 555
Hours) (Purchased New) |
| 178 |
$2,750 |
#278 LEEBOY Model L250
Portable Crack Filler, s/n Unknown, powered by Honda 5.5HP gas engine,
equipped with 250 gallon propane heated tank, self winding hose reel, and
205/75R14 tires. In good condition with good tires. (Purchased New) |
| 179 |
$3,500 |
#310 AMERICAN AUGERS Model
B114-3P Bentonite Pump, Briggs & Stratton 8HP gas (Purchased New) (SALES
TAX) |
| 180 |
$2,600 |
#319 AIRPLACO 400 PSI
Portable Grout Pump, Tecumseh gas (Purchased New) (SALES TAX) |
| 181 |
$150 |
AMERIC Electric Casing
Ventilator (SALES TAX) |
| 182 |
$34,500 |
#320 1997 ROBBINS Model
SBU-A 36, 36" Full-Face Hard Rock Boring Head, s/n SBU36111, disc
cutters and ripping teeth, 38" bore with 4" Hex drive to be used
with any conventional Auger Boring Machine with 12,500 to 17,000 ft. lb.
torque and 65,200 to 130,400 lb. thrust. (400' of use since Thrust Bearing
replaced '05 - Approx. 1,500' total use) In good condition. (Purchased New)
(SALES TAX) |
| 183 |
$1,200 |
36" Christmas Tree
Rock Head, 4" Hex (SALES TAX) |
| 184 |
$1,000 |
36" Christmas Tree
Rock Head, 4" Hex (SALES TAX) |
| 185 |
$1,200 |
24" Christmas Tree
Rock Head, 4" Hex (SALES TAX) |
| 186 |
$700 |
24" Christmas Tree
Rock Head, 4" Hex (SALES TAX) |
| 187 |
$900 |
12" Christmas Tree
Rock Head, 3" Hex |
| 188 |
$1,000 |
36" Bar Rock Head,
4" Hex (SALES TAX) |
| 189 |
$1,000 |
36" Bar Dirt Head,
4" Hex (SALES TAX) |
| 190 |
$900 |
24" Bar Rock Head,
4" Hex (SALES TAX) |
| 191 |
$200 |
24" Bar Dirt Head,
4" Hex (SALES TAX) |
| 192 |
$25,000 |
220' of 36", 10' of
24", 42" and 20' of Casing Auger, 4" Hex
(SALES TAX) |
| 193 |
$4,000 |
140' of 12" Auger,
3" Hex (SALES TAX) |
| 193A |
$3,500 |
Approximately 100' of
12" Auger, 3" Hex (SALES TAX) |
| 193B |
$3,500 |
Approximately 100' of
12" Auger, 3" Hex (SALES TAX) |
| 193C |
$3,500 |
Approximately 100' of
12" Auger, 3" Hex (SALES TAX) |
| 194 |
$1,000 |
113' of 48" Steel
Casing (SALES TAX) |
| 195 |
$2,900 |
207' of Assorted Steel
Casing |
| 196 |
$600 |
Pneumatic Horizontal Drill,
with IR drill head and drill steel (SALES TAX) |
| 197 |
$1,200 |
(9 Pallets) Steel Casing
Spacers |
| 198 |
$2,750 |
Auger Accessories |
| 199 |
$325 |
(3 Drums) STA-SAFE
Antifreeze and (2 Drums) Rock Drill Oil (SALES TAX) |
| 200 |
$56,500 |
#486 2004 KENWORTH Model
T800 Tandem Axle Water Truck, VIN# 1XKDAT8X44J052625, powered by Cat C-10,
335HP diesel engine and Fuller 9 speed transmission, equipped with 4,000
gallon epoxy lined water body, Rainmaker PTO driven pump, (2) front-(3) rear-(1) side air actuated spray heads, side hose
reel with 2" hose, side water hose outlet, spring suspension, aluminum
wheels, heated mirrors, power passenger window, air conditioning, 315/80R22.5
front and 295/75R22.5 rear tires. In good to very good condition with good
tires. (Odometer Reads 323,599 Miles) |
| 201 |
$64,500 |
#525 2005 MACK Model CV713
Granite Tri-Axle Dump Truck, VIN# 1M2AG11C45M034596, powered by Mack AI-427HP
diesel engine and Allison automatic transmission, equipped with J&J
17'6" aluminum heated dump body with power tarp, air gate, coal chute,
44,000# rears and 18,000# front axle, Hendrickson lift 3rd axle, air ride
suspension, 2-stage Jake brake, aluminum wheels, heated mirrors, power
windows and locks, air conditioning, cruise control, 385/65R22.5 front and
lift, 11R24.5 rear tires. In good condition with very good tires. (Odometer
Reads 342,605 Miles) (Meter Reads 15,265 Hours) |
| 202 |
$29,500 |
#520 2000 MACK Model RD688S
Tri-Axle Dump Truck, VIN# 1M2P324C0YM053691, powered by Mack E7-427 diesel
engine and Fuller 8LL, 10 speed transmission, equipped with 17' steel dump
body with electric tarp, 44,000# rears, 18,000# front and 18,000# lift axle,
camelback suspension, 2-stage Jake brake, aluminum wheels, heated mirrors,
air conditioning, cruise control, 385/65R22.5 front and lift, and 11R24.5
rear tires. In good condition with excellent tires. (Odometer Reads 587,475
Miles) (Meter Reads 26,457 Hours) |
| 203 |
$67,000 |
#380 2003 MACK Model DM688S
Tri-Axle Dump Truck, VIN# 1M2B212C93M004962, powered by Mack AI-350 diesel
engine and Fuller 8LL, 10 speed transmission, equipped with 18' heated steel
dump body with (2) chutes and
electric tarp, 50,000# rears and 20,000# front and lift axles, 90,000# GVWR,
camelback suspension, 2-stage engine brake, 216" wheelbase, heated
mirrors, air conditioning, cruise control, 425/65R22.5 front and lift, and 12R22.5
rear tires. In good to very good condition with excellent tires. (Odometer
Reads 51,746 Miles) (Meter Reads 5,072 Hours) (Purchased New) |
| 204 |
$54,500 |
#360 2001 MACK Model DM688S
Tri-Axle Dump Truck, VIN# 1M2B212C41M004834, powered by Mack E7-350 diesel
engine and Fuller 8LL, 10 speed transmission, equipped with J&J
18'6" heated steel dump body with chute and electric tarp, 50,000#
rears, 20,000# front and lift axles, camelback suspension, 2-stage Jake
brake, heated mirrors, air conditioning, cruise control, 425/65R22.5 front
and lift, and 12R22.5 rear tires. In good to very good condition with very
good tires. (Odometer Reads 076,111 Miles) (Meter Reads 07,068 Hours)
(Purchased New) |
| 205 |
$36,000 |
#220 1988 MACK Model DM690S
Tri-Axle Dump Truck, VIN# 1M2B197C9JA001861, powered by Mack 300HP diesel
engine and Mack T2070, 7 speed extended range transmission, equipped with JMH
18'6" heated steel tub-type rock body with high lift tailgate, 1/2" Hardox floor, chute and electric tarp, 50,000#
rears, 20,000# front and lift axles, camelback suspension, single stage
engine brake, 445/65R22.5 front and lift tires, and 11.00R22 rear tires. In
good condition with good tires. (Odometer Reads 167,401 Miles) (Meter Reads
0,183 Hours) (Purchased New) (Poor Lift Tires) |
| 206 |
$48,000 |
#524 2005 KENWORTH Model
T300 Tandem Axle Dump Truck, VIN# 3BKMLD9X75F088561, powered by Cat C-7 275HP
diesel engine and Fuller 8LL, 10 speed transmission, equipped with 15' steel
dump body with high lift tailgate, chute, and manual tarp, spring/beam
suspension, 54,600# GVWR, air conditioning, cruise control, and 11R22.5
tires. In good condition with good tires. (Odometer Reads 073,570 Miles)
(Meter Reads 04,988 Hours) (40,000# Rears and 14,600# Front Axle) |
| 207 |
$20,000 |
#361 1994 MACK Model RD688S
Tandem Axle Dump Truck, VIN# 1M1P267Y9RM019367, powered by Mack E7-350 diesel
engine and Maxitorque T2090, 9 speed transmission, equipped with Godwin
15'6" steel dump body, 38,000# rears, 12,000# front axle, air
conditioning, cruise control, 315/80R22.5 front and 11R24.5 tires. In good
condition with good tires. (Odometer Reads 163,645) (Reconstructed Title) |
| 208 |
$10,500 |
JMH 16' Heated Steel
Tub-Type Rock Body, 1/2" Hardox floor, high
lift tailgate with hoist, bottom rail, and cylinder mount. In good condition.
(SALES TAX) |
| 209 |
$16,500 |
#429 1996 CHEVROLET Kodiak
Single Axle Dump Truck, VIN# 1GBM7H1J9TJ102175, powered by Cat 3116 250HP
diesel engine and automatic transmission, equipped with 10' steel dump body,
chutes, manual tarp, spring suspension, air brakes, tow hitch, 22,000# rear
and 11,000# front axle, 33,000# GVWR, and 295/75R22.5 tires. In good
condition with good to very good tires. (Odometer Reads 093,722 Miles) |
| 210 |
$32,000 |
#426 1999 CHEVROLET Model
C7500 Single Axle Dump Truck, VIN# 1GBM7H1C6XJ100536, powered by Cat 3126,
250HP diesel engine and automatic transmission, equipped with 10' steel dump
body with chute, air brakes, and spring suspension, tow hitch, 22,000# rear
and 11,000# front axles. In good condition with good tires. (Odometer Reads 046,439
Miles) |
| 211 |
$23,000 |
#396 2003 MACK Model CH613
Tandem Axle Truck Tractor, VIN# 1M1AA18Y53W152472, powered by Mack E7-427
diesel engine and Eaton Fuller 10 speed transmission, equipped with wetline,
2-stage engine brake, airslide 5th wheel, air ride suspension, 164"
wheelbase, aluminum wheels and headache rack with work lights, air
conditioning, heated mirrors, cruise control, and 11R22.5 tires. In good
condition with very good tires. (Odometer Reads 221,057 Miles) (Meter Reads
8,156 Hours) (Reconstructed Title) |
| 212 |
$11,000 |
#348 TRAMAC VR32 Hydraulic
Demolition Hammer, s/n 121377 (Cat 320) (SALES TAX) |
| 213 |
$15,500 |
TRAMAC VR32 Hydraulic
Demolition Hammer, 118539 (JD 230) (SALES TAX) |
| 214 |
$10,000 |
TRAMAC 900 Hydraulic
Demolition Hammer (Cat 320) (SALES TAX) |
| 215 |
$1,750 |
NPK 6X Hydraulic Demolition
Hammer (Cat 446) (SALES TAX) |
| 216 |
$1,750 |
#199 ALLIED 730 Hydraulic
Demolition Hammer (JD 610) (SALES TAX) |
| 217 |
$1,600 |
Demolition Hammer Stand
(SALES TAX) |
| 218 |
$2,500 |
ATLAS Barrier Lifter |
| 219 |
$2,500 |
ATLAS Barrier Lifter |
| 220 |
$4,000 |
NPK C8C Hydraulic Plate
Compactor, with backfill blade (Cat 320) (SALES TAX) |
| 221 |
$3,500 |
NPK C8C Hydraulic Plate
Compactor, with backfill blade (Cat 320) (SALES TAX) |
| 222 |
$1,900 |
OKADA Hydraulic Plate
Compactor (JD 135) |
| 223 |
$1,450 |
OKADA Hydraulic Plate
Compactor (JD135) |
| 224 |
$2,000 |
TRAMAC Hydraulic Plate
Compactor (JD 230) (SALES TAX) |
| 225 |
$1,250 |
ALLIED Hydraulic Plate
Compactor (JD 710) (SALES TAX) |
| 226 |
$500 |
ALLIED Hydraulic Plate
Compactor (JD 710) (SALES TAX) |
| 227 |
$500 |
ALLIED Hydraulic Plate
Compactor (JD 710) (SALES TAX) |
| 228 |
$500 |
ALLIED Hydraulic Plate
Compactor (JD 710) (SALES TAX) |
| 229 |
$500 |
ALLIED Hydraulic Plate
Compactor (JD 710) (SALES TAX) |
| 230 |
$500 |
ALLIED Hydraulic Plate
Compactor (JD 710) (SALES TAX) |
| 231 |
$500 |
NPK Hydraulic Plate
Compactor (Cat 446) (SALES TAX) |
| 232 |
$500 |
ALLIED Plate Compactor (JD
610) (SALES TAX) |
| 233 |
$200 |
(2) Hammer Points (Indeco
10,000#) |
| 234 |
$200 |
(5) Hammer Points (Tramac
55) |
| 235 |
$1,300 |
(6) Hammer Points (Tramac
900) |
| 236 |
$1,300 |
(5) Hammer Points (Tramac
VR32) |
| 237 |
$200 |
(4) Hammer Points (Tramac
VR32) |
| 238 |
$200 |
(5) Hammer Points (3 For
NPK 6XA & 2 Miscellaneous) |
| 239 |
$50 |
(4) Compaction Feet (SALES
TAX) |
| 240 |
$2,500 |
CP 36" Digging Bucket
(JD 450) (SALES TAX) |
| 241 |
$3,250 |
CF 30" Digging Bucket
(JD 450) (SALES TAX) |
| 242 |
$600 |
ESCO 32" Digging
Bucket (JD 450) (SALES TAX) |
| 243 |
$2,500 |
CF 30" Digging Bucket
(JD 450) (SALES TAX) |
| 244 |
$1,500 |
ESCO 30" Digging
Bucket (JD 450) (SALES TAX) |
| 245 |
$3,000 |
CAT 22" Digging Bucket
(Cat 320 or Komatsu PC228) (SALES TAX) |
| 246 |
$3,000 |
CAT 24" Digging Bucket
(Cat 320 or Komatsu PC228) (SALES TAX) |
| 247 |
$3,000 |
22" Digging Bucket
(Cat 320 or Komatsu PC228) (SALES TAX) |
| 248 |
$2,350 |
HENSLEY 42" Digging
Bucket (Komatsu PC228) |
| 249 |
$3,750 |
CAT 48" Digging Bucket
(Cat 330) (SALES TAX) |
| 250 |
$3,200 |
CAT 32" Digging Bucket
(Cat 330) (SALES TAX) |
| 251 |
$2,200 |
CAT 28" Digging Bucket
(Cat 330) (SALES TAX) |
| 252 |
$2,950 |
CP 24" Digging Bucket
(Komatsu PC128) (SALES TAX) |
| 253 |
$3,250 |
CP 24" Digging Bucket
(Komatsu PC128) (SALES TAX) |
| 254 |
$2,950 |
CP 18" Digging Bucket
(Komatsu PC128) |
| 255 |
$1,300 |
32" Digging Bucket
(Komatsu PC128) (SALES TAX) |
| 256 |
$1,600 |
32" Digging Bucket,
with cutting edge (Komatsu PC128) (SALES TAX) |
| 257 |
$300 |
ESCO 28" Digging
Bucket (JD 230) (SALES TAX) |
| 258 |
$100 |
ESCO 34" Digging
Bucket (JD 890) (SALES TAX) |
| 259 |
$500 |
HENSLEY 24" Digging
Bucket (JD 790) (SALES TAX) |
| 260 |
$500 |
18" Digging Bucket (JD
790) (SALES TAX) |
| 261 |
$100 |
ESCO 18" Digging
Bucket (JD 690) (SALES TAX) |
| 262 |
$100 |
SECO 24" Digging
Bucket, with cutting edge (JD 610) (SALES TAX) |
| 263 |
$100 |
24" Digging Bucket
(Cat 446) (SALES TAX) |
| 264 |
$100 |
36" Digging Bucket,
with cutting edge (JD 710) (SALES TAX) |
| 265 |
$100 |
30" Digging Bucket,
with cutting edge (JD 710) (SALES TAX) |
| 266 |
$100 |
36" Digging Bucket,
with cutting edge (JD 710) (SALES TAX) |
| 267 |
$100 |
24" Digging Bucket (JD
710) (SALES TAX) |
| 268 |
$150 |
12" Digging Bucket (JD
710) (SALES TAX) |
| 269 |
$150 |
24" Digging Bucket,
with cutting edge (JD 710) (SALES TAX) |
| 270 |
$150 |
14" Digging Bucket (JD
710) (SALES TAX) |
| 271 |
$150 |
18" Digging Bucket (JD
310/410/610) (SALES TAX) |
| 272 |
$150 |
18" Digging Bucket (JD
310/410/610) (SALES TAX) |
| 273 |
$150 |
14" Digging Bucket (JD
310/410) (SALES TAX) |
| 274 |
$250 |
Pipe Grabs (SALES TAX) |
| 275 |
$250 |
Pipe Grabs (SALES TAX) |
| 276 |
$250 |
Pipe Grabs (SALES TAX) |
| 277 |
$1,000 |
CRESCENT 12" Aluminum
Pipe Tong |
| 277A |
$1,000 |
CRESCENT 12" Aluminum
Pipe Tong |
| 277B |
$1,000 |
CRESCENT 8" Aluminum
Pipe Tong |
| 277C |
$1,000 |
CRESCENT 8" Aluminum
Pipe Tong |
| 277D |
$1,000 |
CRESCENT 8" Aluminum
Pipe Tong |
| 277E |
$600 |
CRESCENT 6" Aluminum
Pipe Tong |
| 277F |
$350 |
CRESCENT 4" Aluminum
Pipe Tong |
| 278 |
$1,400 |
(4) Pipe Tongs (SALES TAX) |
| 279 |
$500 |
(4) Pipe Tongs (SALES TAX) |
| 280 |
$1,400 |
(3) Pipe Tongs |
| 281 |
$700 |
48" Forks (JD 515)
(SALES TAX) |
| 282 |
$700 |
72" Forks (JD 510)
(SALES TAX) |
| 283 |
$700 |
72" Forks (JD 610)
(SALES TAX) |
| 284 |
$100 |
Asphalt Cutting Wheel
(SALES TAX) |
| 285 |
$100 |
Asphalt Cutting Wheel
(SALES TAX) |
| 286 |
$100 |
Asphalt Cutting Wheel
(SALES TAX) |
| 287 |
$700 |
(5) Adapter Plates |
| 288 |
$700 |
(5) Adapter Plates |
| 289 |
$300 |
8' Hydraulic Angle Snow
Plow (SALES TAX) |
| 290 |
$100 |
SWEEPSTER 6' Hydraulic
Angle Broom (SALES TAX) |
| 291 |
$100 |
SWEEPSTER 6' Hydraulic
Angle Broom (SALES TAX) |
| 292 |
$1,000 |
BRILLION 642 Seeder
(3-Point Hitch) (SALES TAX) |
| 293 |
$175 |
PTO Broadcast Spreader
(3-Point Hitch) (SALES TAX) |
| 294 |
$650 |
JOHN DEERE 550 PTO Roto
Tiller (3-Point Hitch) (SALES TAX) |
| 295 |
$200 |
JOHN DEERE PTO Auger
(3-Point Hitch) (SALES TAX) |
| 296 |
$300 |
8' Scarifier/Stone Rake,
with leveling blade (3-Point Hitch) (SALES TAX) |
| 297 |
$300 |
8' Stone Rake, with
leveling blade (3-Point Hitch) (SALES TAX) |
| 298 |
$800 |
JOHN DEERE 82" Mower
(3-Point Hitch) (SALES TAX) |
| 299 |
$250 |
7' Drag Box (SALES TAX) |
| 300 |
$300 |
6' Drag Box (SALES TAX) |
| 301 |
$500 |
4-Gang Disc Harrow (SALES
TAX) |
| 302 |
$250 |
(24) Bucket Teeth |
| 303 |
$250 |
(19) Bucket Teeth |
| 304 |
$500 |
(38) Bucket Teeth and (6)
Shanks |
| 305 |
$500 |
(18) Bucket Teeth |
| 306 |
$500 |
(33) Bucket Teeth, (2)
Cutting Edges, and (2) Shanks |
| 307 |
$400 |
Track Pads and Hardware |
| 308 |
(see Lot 316) |
(2) ICON 8'x20' Shields
with 4' extensions and side rails (SALES TAX) |
| 309 |
(see Lot 316) |
(2) ICON 8'x20' Shields with
4' extensions and side rails (SALES TAX) |
| 310 |
(see Lot 316) |
(2) ICON 8'x20' Shields
with 4' extensions and side rails (SALES TAX) |
| 311 |
(see Lot 316) |
(2) ICON 8'x16' Shields
with 4' extensions and side rails (SALES TAX) |
| 312 |
(see Lot 316) |
(2) ICON 8'x16' Shields
with 4' extensions and side rails (SALES TAX) |
| 313 |
(see Lot 316) |
(2) ICON 8'x12' Shields
with 4' extensions (SALES TAX) |
| 314 |
(see Lot 316) |
(2) ICON 8'x12' Shields
with 4' extensions (SALES TAX) |
| 315 |
(see Lot 316) |
(4) ICON Double Corner
Slide Posts (SALES TAX) |
| 316 |
$40,000 |
Entirety Bid of Lots #308
Thru #315 (SALES TAX) |
| 317 |
$5,000 |
PRO-TEC 20'x10'x6"
Wall Trench Box, with 10' spreaders (CERT) (SALES TAX) (s/n 10303) |
| 318 |
$5,000 |
PRO-TEC 14'x10'x6"
Wall Trench Box, with 10' spreaders (CERT) (SALES TAX) (s/n 10304) |
| 319 |
$5,500 |
PRO-TEC 25'x8'x6" Wall
Trench Box, with 48" spreaders (CERT) (SALES TAX) |
| 320 |
$5,500 |
PRO-TEC 26'x8'x6" Wall
Trench Box, with 48" spreaders (CERT) (SALES TAX) (s/n 10301) |
| 321 |
$400 |
PRO-TEC 48" Spreaders
and Stacking Kit (SALES TAX) |
| 322 |
$3,000 |
GME 24'x8'x6" Wall
Trench Box, with 48" spreaders (CERT) (s/n M1840) |
| 323 |
$3,000 |
KUNDEL 24'x8'x7" Wall
Trench Box, with 120" spreaders (CERT) (SALES TAX) (s/n 4751) |
| 324 |
$4,500 |
GME 24'x8'x6" Wall
Trench Box, with 48" spreaders (CERT) (s/n M1845) |
| 325 |
$4,500 |
GME 24'x8'x6" Wall
Trench Box, with 48" spreaders (CERT) (s/n M05030678) |
| 326 |
$7,500 |
KUNDEL 20'x8'x7" Wall
Trench Box, with 4' stacking extension with 36" spreaders (CERT) (SALES
TAX) (s/n 4689) |
| 327 |
$6,750 |
GME 16'x8'x4" Wall
Trench Box, with 48" spreaders (CERT) (s/n M0806654) |
| 328 |
$5,250 |
GME 8'x8'x3" Wall
Trench Box, with 48" spreaders (CERT) (s/n 134797) |
| 329 |
$900 |
KUNDLE Back Stop (SALES
TAX) |
| 330 |
$1,000 |
(2) Single and (2) Double
168" KUNDEL Spreaders (SALES TAX) |
| 331 |
$600 |
(2) Single and (1) Double
120" KUNDEL Spreaders (SALES TAX) |
| 332 |
$200 |
(6) KUNDEL Spreaders (SALES
TAX) |
| 333 |
$2,500 |
(7) PRO-TEC 144"
Spreaders |
| 334 |
$1,000 |
(4) PRO-TEC 120"
Spreaders |
| 335 |
$500 |
(2) PRO-TEC 96"
Spreaders |
| 336 |
$500 |
(4) 60" Spreaders |
| 337 |
$200 |
(4) Spreaders |
| 338 |
$900 |
(4) 72" Spreaders |
| 339 |
$900 |
(4) 72" Spreaders |
| 340 |
$100 |
(4) 48" and (1)
45" Spreaders |
| 341 |
$100 |
(3) 42" Spreaders |
| 342 |
$25 |
(6) Spreaders |
| 343 |
$700 |
10'x8'x8' Manhole Box
(SALES TAX) |
| 344 |
$2,750 |
8'x8' Corrugated Aluminum
Trench Box, with 32" spreaders (CERT) (SALES TAX) |
| 345 |
$2,250 |
10'x8'x3" Wall
Aluminum Trench Box, with adjustable spreaders |
| 346 |
$1,500 |
6'x8'x3" Wall
Sectional Aluminum Trench Box, with adjustable spreaders |
| 347 |
$4,250 |
(2) SPEED SHORE Manguard Round 8'x8.5' Diameter
Stackable Manhole Shoring (1 With Removable Pipe Inlets) (CERT) (SALES TAX) |
| 348 |
$4,250 |
(2) SPEED SHORE Manguard Round 8'x8.5' Diameter
Stackable Manhole Shoring (1 With Removable Pipe Inlets) (CERT) (SALES TAX) |
| 349 |
$4,000 |
GME 12 Cubic Yard Gravel
Bedding Box |
| 350 |
$4,500 |
GME 8 Cubic Yard Gravel
Bedding Box |
| 351 |
$2,750 |
GAR-BRO 462-G Concrete
Bucket |
| 352 |
$1,600 |
GAR-BRO 427-R Concrete
Bucket (SALES TAX) |
| 353 |
$5,000 |
(3 Pieces) 8'x12' Road
Plate (SALES TAX) |
| 354 |
$5,000 |
(3 Pieces) 8'x12' Road
Plate (SALES TAX) |
| 355 |
$5,000 |
(3 Pieces) 8'x12' Road
Plate (SALES TAX) |
| 356 |
$5,000 |
(3) 8'x12' Road Plate
(SALES TAX) |
| 357 |
$4,000 |
(3 Pieces) 8'x12' Road
Plate (SALES TAX) |
| 358 |
$4,250 |
(3 Pieces) 8'x12' Road
Plate (SALES TAX) |
| 359 |
$4,000 |
(3 Pieces) 8'x12' Road
Plate (SALES TAX) |
| 360 |
$3,250 |
(3 Pieces) Assorted Size
Road Plate (SALES TAX) |
| 361 |
$1,500 |
(6 Pieces) Assorted Size
Road Plate (SALES TAX) |
| 362 |
$900 |
SPEED SHORE Trench Shoring,
with pump (SALES TAX) |
| 363 |
$900 |
SPEED SHORE Trench Shoring,
with pump (SALES TAX) |
| 364 |
$900 |
SPEED SHORE Trench Shoring,
with pump (SALES TAX) |
| 365 |
$300 |
SPEED SHORE Adjustable
Spreaders |
| 366 |
$200 |
Spreader Parts (SALES TAX) |
| 367 |
$2,250 |
20,000 Gallon Single Wall
Above Ground Fuel Storage Tank (Cleaned and Certified) (SALES TAX)
(10'6"x31') |
| 368 |
$6,500 |
20,000 Gallon Single Wall
Above Ground Fuel Storage Tank (Cleaned and Certified) (SALES TAX) (10'x34') |
| 369 |
$7,000 |
GRUNDOMAT 180P, 7"
Pneumatic Piercing Tool, it hose |
| 370 |
$2,100 |
5" Pneumatic Piercing
Tool, with 7" sleeve expander with hose (SALES TAX) |
| 371 |
$1,700 |
ALLIED 4" Pneumatic
Piercing Tool, with hose (SALES TAX) |
| 372 |
$2,000 |
ALLIED 4" Pneumatic
Piercing Tool (SALES TAX) |
| 373 |
$800 |
ALLIED 3" Pneumatic
Piercing tool, with hose (SALES TAX) |
| 374 |
$800 |
ALLIED 3" Pneumatic
Piercing Tool, with hose (SALES TAX) |
| 375 |
$700 |
4" Pneumatic Piercing
Tool, with expander sleeve and hose |
| 376 |
$8,500 |
MUELLER CL-12, 12"
pipe Tap, with accessories (Purchased New) (SALES TAX) |
| 377 |
$1,600 |
MUELLER A-3 Pipe Tap, with
IR pneumatic drive (SALES TAX) |
| 378 |
$1,400 |
MUELLER B-100 Pipe Tap
(SALES TAX) |
| 379 |
$1,400 |
MUELLER B-100 Pipe Tap
(SALES TAX) |
| 380 |
$1,400 |
MUELLER B-100 Pipe Tap
(SALES TAX) |
| 381 |
$150 |
FORD Pipe Tap (SALES TAX) |
| 382 |
$200 |
Pipe Tap (SALES TAX) |
| 382A |
$50 |
MUELLER PL-2 PVC Pipe Tap
(SALES TAX) |
| 383 |
$150 |
(2 Boxes) Pipe Tap
Accessories (SALE TAX) |
| 384 |
$1,300 |
MUELLER Power Drive |
| 385 |
$150 |
COPPER LINE Crimping Tool
(SALES TAX) |
| 386 |
$150 |
Soil Pipe Cutter, with (2)
porta powers (SALES TAX) |
| 387 |
$0 |
Soil Pipe Cutter, with
porta power (SALES TAX) |
| 388 |
$30 |
Soil Pipe Cutters and Chain
Wrenches (SALES TAX) |
| 389 |
$425 |
RIDGID Threader Set and
Stands (SALES TAX) |
| 390 |
$2,100 |
RICE Hydrostatic Test Pump |
| 391 |
$800 |
CHERNE Vacuum Test Pump
(SALES TAX) |
| 392 |
$650 |
CHERNE Vacuum Test Pump
(SALES TAX) |
| 393 |
$500 |
BULLARD Fresh Air Pump |
| 394 |
$5,250 |
TROJAN Sewer Camera |
| 395 |
$2,000 |
LEICA Pipe Laser |
| 396 |
$2,100 |
TOPCON TP-L4GV Pipe Laser |
| 397 |
$2,000 |
TOPCON TP-L3A Pipe Laser |
| 398 |
$1,600 |
TOPCON TP-L3A Pipe Laser
(SALES TAX) |
| 399 |
$2,200 |
TOPCON TP-L4B Pipe Laser
(SALES TAX) |
| 400 |
$50 |
SPECTRA PHYSICS Dialgrade
Pipe Laser (SALES TAX) |
| 401 |
$25 |
AGL Pipe Laser (SALES TAX) |
| 402 |
$125 |
AGL Pipe Laser (SALES TAX) |
| 403 |
$0 |
(2 Boxes) Site Levels,
Brackets, and Accessories (SALES TAX) |
| 404 |
$25 |
Pipe Ventilator (SALES TAX) |
| 405 |
$25 |
Pipe Ventilator (SALES TAX) |
| 406 |
$25 |
Pipe Ventilator (SALES TAX) |
| 407 |
$25 |
Pipe Ventilator (SALES TAX) |
| 408 |
$5 |
COINMASTER Precious Metal
Locator (SALES TAX) |
| 409 |
$5 |
FISHER Water Leak Detector
(SALES TAX) |
| 410 |
$350 |
METROTECH Leak Detector
(SALES TAX) |
| 411 |
$225 |
Model GA-52B Magnetic
Locator (SALES TAX) |
| 412 |
$75 |
Carbon Monoxide Tester
(SALES TAX) |
| 413 |
$50 |
Gas Detector (SALES TAX) |
| 414 |
$500 |
GEO SONICS SSU3000LCP
Seismograph (SALES TAX) |
| 415 |
$10 |
OZA GPS-3 Seismograph
(SALES TAX) |
| 416 |
$50 |
RESEARCH ENERGY Blasting
Box (SALES TAX) |
| 417 |
$30 |
(2) Blasting Machines and
Leak Detector (SALES TAX) |
| 418 |
$3,000 |
GODWIN 6" Submersible
Pump, 460 volt, 3-phase |
| 419 |
$350 |
PROSSER 6" Submersible
Pump, 220 volt, 3-phase (SALES TAX) |
| 420 |
$600 |
TSURUMI 3" Submersible
Pump, 220 volt, 3-phase |
| 421 |
$600 |
FLYGT 3" Submersible
Pump, 220 volt, 3-phase |
| 422 |
$1,000 |
TSURUMI 3" Submersible
Pump, 220 volt, single phase |
| 423 |
$1,000 |
TSURUMI 3" Submersible
Pump, 220 volt, single phase |
| 424 |
$700 |
TSURUMI 3" Submersible
Pump, 220 volt, single phase |
| 425 |
$700 |
TSURUMI 3" Submersible
Pump, 220 volt, single phase |
| 426 |
$700 |
TSURUMI 3" Submersible
Pump, 220 volt, single phase |
| 427 |
$250 |
TSURUMI 2" Submersible
Pump, 110 volt |
| 428 |
$250 |
2" Submersible Pump,
110 volt |
| 429 |
$250 |
2" Submersible Pump,
110 volt |
| 430 |
$250 |
2" Submersible Pump,
110 volt |
| 431 |
$250 |
2" Submersible Pump,
110 volt |
| 432 |
$250 |
2" Submersible Pump,
110 volt |
| 432A |
$10 |
PROSSER Submersible Pump
(Parts Only) |
| 433 |
$800 |
GODWIN Float Switch System
(SALE TAX) |
| 434 |
$250 |
36" and 42"
Casing Track Torch (SALES TAX) |
| 435 |
$150 |
HURCO Manhole Ventilator |
| 436 |
$150 |
HURCO Manhole Ventilator
(SALES TAX) |
| 437 |
$300 |
30" Manhole Test Plug
(SALES TAX) |
| 438 |
$300 |
24" Manhole Test Plug
(SALES TAX) |
| 439 |
$300 |
24" Manhole Test Plug
(SALES TAX) |
| 440 |
$1,300 |
MILLER Manhole Rescue
System (SALES TAX) |
| 441 |
$1,100 |
MILLER Manhole Rescue
System (SALES TAX) |
| 442 |
$1,900 |
#108 UNITED SURVEY Model
5203 Portable Test Unit, s/n 78151, equipped with 2-stage air compressor with
Honda gas engine, self-winding air hose reel, air pig, and 175/70R13 tires.
In good condition with good tires. (Purchased New) (SALES TAX) |
| 443 |
$1,200 |
LANSAS 15"x30"
Dome Head Test Plug |
| 444 |
$1,100 |
LANSAS 15"x30"
Dome Head Test Plug |
| 445 |
$900 |
LANSAS 12"x24"
Dome Head Test Plug |
| 446 |
$200 |
(2) UNITED SURVEY Manhole
and Sewer Test Plugs |
| 447 |
$1,900 |
LANSAS 24" to 48"
Test Plug |
| 448 |
$1,900 |
LANSAS 24" to 48"
Test Plug |
| 449 |
$1,000 |
LANSAS 20" to 36"
Test Plug |
| 450 |
$1,100 |
LANSAS 15" to 30"
Test Plug |
| 451 |
$1,100 |
15" to 30" Test
Plug |
| 452 |
$1,000 |
(5) Test Plugs |
| 453 |
$200 |
Test Plugs |
| 454 |
$200 |
Test Plugs |
| 455 |
$700 |
(1 Barrel) Test Plugs |
| 456 |
$200 |
Test Plugs and Air Line |
| 457 |
$1,300 |
Pipe Mandrels |
| 458 |
$50 |
(2) Manhole Test Lids |
| 459 |
$50 |
Test Plug Retriever (SALES
TAX) |
| 460 |
$300 |
(2 Spools) Air Line (SALES
TAX) |
| 461 |
$300 |
(1 Pallet) Test Plugs
(SALES TAX) |
| 462 |
$100 |
(2 Pallets) of Test Plugs
(SALES TAX) |
| 463 |
$100 |
20' and 10' Sections of
12" and 8' Section of 8" Suction Hose |
| 464 |
$525 |
20' Section of 8"
Suction Hose |
| 465 |
$525 |
20' Section of 8"
Suction Hose |
| 466 |
$525 |
20' Section of 8"
Suction Hose |
| 467 |
$525 |
20' Section of 8"
Suction Hose |
| 468 |
$525 |
20' Section of 8"
Suction Hose |
| 469 |
$350 |
(3 Sections) 6"
Suction Hose |
| 470 |
$350 |
(4 Sections) 6"
Suction Hose |
| 471 |
$500 |
(3) 20' Sections of 8"
Suction Hose |
| 472 |
$800 |
(6 Sections) 6"
Suction Hose |
| 473 |
$500 |
4" Suction Hose |
| 474 |
$350 |
3" Suction Hose |
| 475 |
$250 |
3" Suction Hose |
| 476 |
$300 |
2" Suction Hose |
| 477 |
$100 |
3" Suction Hose |
| 478 |
$150 |
2" Suction Hose |
| 479 |
$800 |
6" and 8"
Discharge Hose |
| 480 |
$900 |
6" and 8"
Discharge Hose |
| 481 |
$800 |
6" and 8"
Discharge Hose |
| 482 |
$900 |
6" and 8"
Discharge Hose |
| 483 |
$550 |
(4 Skids) Discharge Hose |
| 484 |
$300 |
(2 Skids) Discharge Hose |
| 485 |
$700 |
(1 Pallet) Discharge Hose |
| 486 |
$25 |
(2 Skids) Discharge Hose |
| 487 |
$600 |
(1 Pallet Box) Hose
Couplers |
| 488 |
$225 |
(2 Skids) 12" Hose
Couplers and Strainers |
| 489 |
$150 |
(1 Pallet) Hose Hardware |
| 490 |
$250 |
Starter Boxes and Power
Cord |
| 491 |
$100 |
(1 Pallet Box) Air Hose |
| 492 |
$25 |
Pipe Gasket (Hanging From
Loft) (BUYER MUST LOAD) |
| 493 |
$25 |
Contents of (2) Shelving
Units (BUYER MUST LOAD) |
| 494 |
$500 |
FERNCO Fittings and Clamps
(BUYER MUST LOAD) |
| 495 |
$25 |
PVC Fittings (BUYER MUST
LOAD) |
| 496 |
$950 |
Repair Sleeves and Clamps
(BUYER MUST LOAD) |
| 497 |
$400 |
Pipe Saddles (BUYER MUST
LOAD) |
| 498 |
$125 |
Pipe Joint Lubricant (BUYER
MUST LOAD) |
| 499 |
$175 |
Contents of (5) Sections of
Shelving (BUYER MUST LOAD) |
| 500 |
$45 |
Shop Table and Contents
(BUYER MUST LOAD) |
| 500A |
$575 |
Pins and Bushings (BUYER
MUST LOAD) |
| 501 |
$10 |
Contents of (4) Sections of
Shelving (BUYER MUST LOAD) |
| 502 |
$100 |
Contents of (5) Sections of
Shelving (BUYER MUST LOAD) |
| 503 |
$125 |
Link Seal (BUYER MUST LOAD) |
| 504 |
$25 |
Form Hardware (BUYER MUST LOAD) |
| 505 |
$0 |
Conduit Connector
Boxes (BUYER MUST LOAD) |
| 506 |
$225 |
Pipe and Water Stop (BUYER MUST LOAD) |
| 507 |
$45 |
Temporary Electric
Panels (BUYER MUST LOAD) |
| 508 |
$35 |
Clear Tubing and Pipe
Insulation (BUYER MUST LOAD) |
| 509 |
$500 |
Copper Tubing (BUYER MUST LOAD) |
| 510 |
$35 |
Contents of Upper
Shelf (BUYER MUST LOAD) |
| 511 |
$25 |
Air Hose (BUYER MUST LOAD) |
| 512 |
$25 |
Discharge Hose (BUYER MUST LOAD) |
| 513 |
$0 |
Bull Hose (BUYER MUST LOAD) |
| 514 |
$45 |
Oxygen/Acetylene Hose (Top
Shelf) (BUYER MUST LOAD) |
| 515 |
$25 |
Air Hose (BUYER MUST LOAD) |
| 516 |
$650 |
Excavator Windows (JD 450
and Cat 330) (BUYER MUST LOAD) |
| 517 |
$10 |
Tie Wire (BUYER MUST LOAD) |
| 518 |
$25 |
Contents of (2) Shelves
(BUYER MUST LOAD) |
| 519 |
$45 |
CRAFTSMAN 10" Radial
Arm Saw |
| 520 |
$40 |
Contents of (4) Shelves
(BUYER MUST LOAD) |
| 521 |
$10 |
Contents of (2) Shelves
(BUYER MUST LOAD) |
| 522 |
$140 |
Digging Tools (BUYER MUST
LOAD) |
| 523 |
$55 |
Contents of (2) Shelves
(BUYER MUST LOAD) |
| 524 |
$70 |
Water Main Keys |
| 525 |
$75 |
(2 Barrels) Contractor
Tools |
| 526 |
$300 |
Contractor Kits |
| 527 |
$100 |
Contractor Kits |
| 528 |
$100 |
Contractors Kits |
| 529 |
$100 |
Fuel Cans (Under Bench) |
| 530 |
$0 |
Fuel Cans (On Shelf) |
| 531 |
$35 |
Work Lights |
| 532 |
$25 |
Hardware and Filters |
| 533 |
$325 |
Starters and Alternators |
| 534 |
$40 |
Filters |
| 535 |
$40 |
Filters |
| 536 |
$40 |
Filters |
| 537 |
$25 |
Flag Pole |
| 538 |
$10 |
Portable Heater |
| 539 |
$10 |
String Line and Marking
Paint |
| 540 |
$35 |
(5) Bottle Jacks |
| 541 |
$55 |
Pneumatic Demo Saw |
| 542 |
$25 |
(8 Bins) Hardware (BUYER
MUST LOAD) |
| 542A |
$75 |
Charge Kit For IR ECM590
Drill |
| 543 |
$10 |
Hardware |
| 544 |
$150 |
Combination Wrenches and
Sockets |
| 545 |
$125 |
(2 Boxes) Sockets |
| 546 |
$95 |
3/4" Drive Socket Set |
| 547 |
$55 |
Assorted Tools |
| 548 |
$45 |
Assorted Tools |
| 549 |
$45 |
Assorted Tools |
| 550 |
$5 |
Shop Vac |
| 551 |
$250 |
Grease Guns |
| 552 |
$175 |
(3 Buckets) Wrenches and
Sockets |
| 553 |
$0 |
(3) Air Knives |
| 553A |
$30 |
Cleaning Solution |
| 554 |
$500 |
Banding Cart and
Accessories |
| 555 |
$10 |
Contractors Kit |
| 556 |
$40 |
Contractors Kit |
| 557 |
$40 |
Contractors Kit |
| 558 |
$75 |
Contractors Kit |
| 559 |
$15 |
Spreaders and Seeders |
| 560 |
$80 |
Power Cords |
| 561 |
$0 |
BLANK |
| 562 |
$10 |
Fire Extinguishers and
Reflectors |
| 563 |
$10 |
Fire Extinguishers and
Reflectors |
| 564 |
$25 |
Assorted Miscellaneous |
| 565 |
$35 |
Auto Lube System |
| 566 |
$35 |
Sealants and Sealant Guns |
| 567 |
$1,800 |
Steel Beams (SALES TAX) |
| 568 |
$1,800 |
Steel Beams (SALES TAX) |
| 569 |
$150 |
1946 CHEVROLET Flatbed
Truck, VIN# 14PWE1121, 6 cylinder gas engine, 4 speed trans (TITLE) |
| 570 |
$200 |
Galvanized Roofing (SALES
TAX) |
| 571 |
$100 |
Crane Mats |
| 572 |
$2,400 |
Approximately 650' of 5'
High Temporary Chain Link Fence and Stands |
| 573 |
$5 |
Mortar, Bentonite, Grout,
Limestone, and Pine Bark Nuggets |
| 574 |
$450 |
Blasting Mats |
| 575 |
$25 |
Used Antifreeze |
| 576 |
$80 |
All Thread |
| 577 |
$5 |
Plastic Tubing |
| 578 |
$25 |
Wooden Truss and Lumber |
| 579 |
$525 |
Debris and Dirt Bags |
| 580 |
$5 |
Flat Drain Tile |
| 581 |
$225 |
SDR35 Pipe Fittings |
| 582 |
$550 |
(6 Pallet Boxes) of PVC
Fittings |
| 583 |
$5 |
Butyl Gasket Material |
| 584 |
$25 |
(2 Pallet Boxes) PVC
Fittings |
| 585 |
$575 |
(2 Pallet Boxes) PVC
Fittings |
| 586 |
$625 |
(2 Pallet Boxes) PVC
Fittings |
| 587 |
$200 |
(2 Pallet Boxes) PVC
Fittings |
| 588 |
$200 |
(1 Pallet Box) FERNCO
Couplers |
| 589 |
$5 |
SDR35, PVC Pipe and Conduit |
| 590 |
$5 |
Drive Shafts |
| 591 |
$35 |
FERNCO Couplers |
| 592 |
$1 |
Pipe Insulation |
| 593 |
$8 |
Electric Panel and Hose |
| 594 |
$5 |
Hydro Cover |
| 595 |
$275 |
Stainless Steel Pipe and
Grate |
| 596 |
$65 |
Galvanized and Steel Pipe |
| 597 |
$300 |
SDR35 and PVC Pipe |
| 598 |
$325 |
Pumps, Valves, and Piping |
| 599 |
$5 |
Steel Rod, Grating, and
Stairs |
| 600 |
$25 |
(2) Side Boxes |
| 601 |
$150 |
Wooden Boxes |
| 602 |
$65 |
Assorted Miscellaneous |
| 603 |
$25 |
Metal Tool Bins |
| 604 |
$40 |
Dozer Mailbox |
| 605 |
$70 |
Fuel Pump, Hose Reel, and
Welder |
| 606 |
$75 |
(4) Pumps (PARTS) |
| 607 |
$100 |
WISCONSIN Gas Engine (Not
Running) |
| 608 |
$95 |
(3) Generators (Not
Running) |
| 609 |
$55 |
Mud Flaps |
| 610 |
$100 |
(2) LOMBARDINI Diesel
Engines (Not Running) |
| 611 |
$1 |
Fuel Tank |
| 612 |
$1,000 |
ARMAG 5'x4'x7' Dynamite
Magazine (SALES TAX) |
| 613 |
$45 |
Dynamite Magazine (SALES TAX) |
| 614 |
$0 |
Dynamite Magazine (SALES
TAX) |
| 615 |
$0 |
(2) Dynamite Magazines
(SALES TAX) |
| 616 |
$150 |
(2) 100 Gallon Galvanized
Fuel Tanks, 1 with electric pump (SALES TAX) |
| 617 |
$150 |
(2) 100 Gallon Galvanized
Fuel Tanks, 1 with electric pump (SALES TAX) |
| 618 |
$75 |
(2) 50 Gallon Steel Fuel
Tanks (1 With Manual Pump) (SALES TAX) |
| 619 |
$625 |
Precast Lifters and Hooks |
| 620 |
$400 |
Shackles, Plate Dog, and
Rigging |
| 621 |
$225 |
(6 Piles) Chains and
Binders |
| 622 |
$600 |
(6 Piles) Chains and
Binders |
| 623 |
$175 |
Chains and Hoists |
| 624 |
$700 |
4-Way Chain Spreader and
Chains |
| 625 |
$5 |
Cable Slings and Wire Rope |
| 626 |
$50 |
4-Way and 2-Way Cable
Spreader |
| 627 |
$20 |
(3) Cable Lifting Slings |
| 628 |
$300 |
(6) Cable Spreaders |
| 629 |
$175 |
Spreader Beam |
| 630 |
$425 |
(2) Spreader Beams and Pipe
Lifter |
| 631 |
$375 |
(3) Spreader Beams |
| 632 |
$150 |
(3) Spreader Beams |
| 633 |
$45 |
Lifting Beams |
| 634 |
$100 |
Concrete Curing Blankets |
| 635 |
$1 |
UNUSED 14x17.5 Tire |
| 636 |
$120 |
15x19.5 Tire |
| 637 |
$1 |
(7) Tires |
| 638 |
$1 |
(6) 225/70R19.5 Tires |
| 639 |
$5 |
(3) 12R22.5 Tires |
| 640 |
$1 |
(2) 10.00R20 Tires |
| 641 |
$20 |
(2) 11R22.5 Tires |
| 642 |
$30 |
(3) 11R24.5 and (1)
11.00x24 Tires |
| 643 |
$20 |
Rims and Spacers |
| 644 |
$65 |
18.4x28 Tire |
| 645 |
$130 |
20.5R25 Tire |
| 646 |
$130 |
23.5x25 Tire |
| 647 |
$5 |
Van Seats |
| 648 |
$100 |
Hitches and Receivers |
| 649 |
$100 |
Cat 963 Idler |
| 650 |
$55 |
Hydraulic Hoses |
| 651 |
$35 |
5th Wheel |
| 652 |
$60 |
Lift Cylinder |
| 653 |
$30 |
Tire Chains |
| 654 |
$40 |
(2 Pallet Boxes)
Miscellaneous |
| 655 |
$150 |
DODGE 360CI Gas Engine,
with auto trans (Running Takeout with 3,000 Miles) |
| 656 |
$10 |
(7) ACRY-LOK Buckets |
| 657 |
$50 |
Precast Pipe Inlets and
Basins |
| 657A |
$95 |
(2) Aluminum Manhole
Ladders |
| 658 |
$275 |
Manhole Frames and Covers |
| 659 |
$65 |
(2 Pallets) Manhole Risers |
| 660 |
$125 |
(3 Pallets) Manhole Frames
and Lids |
| 661 |
$275 |
Sewer Grates |
| 662 |
$2,750 |
(48 Sections) US PIPE
12"x18', 864 total, CL52 Ductile Iron Irrigation Pipe |
| 663 |
$1,000 |
(6) Sections 24"
Ductile Iron Pipe |
| 664 |
$800 |
(6 Sections)16"
Ductile Iron Pipe |
| 665 |
$650 |
(7 Sections) 14" and
(1) Section 18" Ductile Iron Pipe |
| 666 |
$1,750 |
(2 Sections) 8"
Ductile Iron Pipe |
| 667 |
$500 |
8" and 12" Ductile
Iron Pipe |
| 668 |
$600 |
Ductile Iron Pipe |
| 669 |
$400 |
Ductile Iron Pipe |
| 670 |
$4,500 |
Curb and Radius Forms with
Pins and Hardware |
| 671 |
$325 |
(7 Pallets) Ductile
Fittings and Test Caps |
| 672 |
$200 |
(7 Pallets) Ductile Iron
Fittings |
| 673 |
$125 |
(1 Pallet Box) Water Stops |
| 674 |
$450 |
(8 Pallets) Ductile
Fittings and Test Caps |
| 675 |
$350 |
(8 Pallets) Ductile
Fittings |
| 676 |
$100 |
(2 Pallets) Mechanical
Joint Glands |
| 677 |
$375 |
(8 Pallets) Ductile
Fittings |
| 678 |
$1,100 |
(5) Gate Valves |
| 679 |
$100 |
Ductile Iron Accessories |
| 680 |
$125 |
12" Flap Valve |
| 681 |
$150 |
(1 Pallet) Gate Valves |
| 682 |
$775 |
(2 Pallets) Sewer Cleanouts
and Lids |
| 683 |
$5 |
Valve Hand Wheels |
| 684 |
$250 |
24" TR Flex Bends |
| 685 |
$250 |
Ductile Iron Fittings,
Bends, and Tees |
| 686 |
$50 |
Gate Valves Repair Clamps |
| 687 |
$125 |
(1 Pallet Box) TR Flex
Clips |
| 688 |
$175 |
(3 Pallets) Mega Lugs and
Retainer Glands |
| 689 |
$25 |
(3 Pallets) 24"
Gripper Rings and Friction Clamps |
| 690 |
$500 |
SDR 35, PVC Pipe, and
Conduit |
| 691 |
$5 |
Precast Inlets, Risers, and
Basins |
| 692 |
$1 |
(12) 55 Gallon Drums |
| 693 |
$75 |
Flag Pole |
| 694 |
$40 |
Concrete Block and Brick |
| 695 |
$150 |
32' Type 1 Aluminum
Extension Ladder |
| 696 |
$200 |
32' Type 1A Fiberglass
Extension Ladder |
| 697 |
$200 |
32' Type 1A Fiberglass
Extension Ladder |
| 698 |
$200 |
32' Type 1A Fiberglass
Extension Ladder |
| 699 |
$175 |
30' Type 1A Fiberglass
Extension Ladder |
| 700 |
$150 |
24' Type 1A Fiberglass
Extension Ladder |
| 701 |
$150 |
24' Type 1A Fiberglass
Extension Ladder |
| 702 |
$275 |
Fiberglass Ladder Sections |
| 703 |
$950 |
(55) UNUSED Safety Cones |
| 704 |
$950 |
(55) UNUSED Safety Cones |
| 705 |
$950 |
(55) UNUSED Safety Cones |
| 706 |
$950 |
(55) UNUSED Safety Cones |
| 707 |
$950 |
Approximately (100) Safety
Cones |
| 708 |
$450 |
Road Signs |
| 709 |
$75 |
Stop and Slow Paddles |
| 710 |
$25 |
Precast Inlets and Risers |
| 711 |
$100 |
Road Signs and Sign Stands |
| 712 |
$100 |
Road Signs and Sign Stands |
| 713 |
$25 |
(4 Pallets) Road Signs and
Barrels |
| 714 |
$650 |
(1 Pallet) WINDMASTER Sign
Stands |
| 715 |
$650 |
(1 Pallet) WINDMASTER Sign
Stands |
| 716 |
$650 |
(1 Pallet) WINDMASTER Sign
Stands |
| 717 |
$25 |
Barricades and Flashers |
| 718 |
$10 |
(3 Piles) Sign Stands and
Barricades |
| 719 |
$5 |
Safety Fence |
| 720 |
$5 |
Galvanized Saddles |
| 721 |
$200 |
Super Silt Fence and Posts |
| 722 |
$25 |
Fencing and Posts |
| 723 |
$70 |
Rebar (Located In Lot #737
Van Trailer) (BUYER MUST LOAD) |
| 724 |
$1 |
Temporary Power Poles |
| 725 |
$100 |
Geotextile and Filter Cloth |
| 726 |
$75 |
Steel Channel and
Reinforcement Wire |
| 727 |
$300 |
(4 Pallets) Sand Bags |
| 728 |
$130 |
(1 Set) 1-Ton Hydraulic
Furniture Movers |
| 729 |
$10 |
File Cabinets (1 Fireproof) |
| 730 |
$50 |
Plan Racks, Drafting Table,
and Stool |
| 731 |
$5 |
(4) Desks and Floor Mat |
| 732 |
$25 |
TV, Fax Machine, Heater,
Radios, and Telephones |
| 733 |
$4,250 |
2008 8'x20' Overseas
Storage Container |
| 734 |
$4,250 |
2008 8'x20' Overseas
Storage Container |
| 735 |
$950 |
STRICK Tandem Axle Van
Storage Trailer, VIN# 193400 (Title-No VIN Plate) |
| 736 |
$850 |
BROWN Tandem Axle Van
Storage Trailer (Title) (VIN# R638093) |
| 737 |
$1,000 |
FRUEHAUF Tandem Axle Van
Storage Trailer (No Title) |
| 738 |
$950 |
STRICK Tandem Axle Van
Storage Trailer (No Title) |
| 739 |
$1,300 |
UTILITY Tandem Axle Van
Storage Trailer (Title) (VIN# 7L81473001) |
| 740 |
$1,400 |
TRAILMOBILE Tandem Axle Van
Storage Trailer (No Title) |
| 741 |
$950 |
STRICK Tandem Axle Van
Storage Trailer (No Title) |
| 742 |
$750 |
TRAILMOBILE Tandem Axle Van
Storage Trailer (No Title) |
| 743 |
$750 |
TRAILMOBILE Tandem Axle Van
Storage Trailer (No Title) |
| 744 |
$100 |
ABS Black Corrugated Pipe
and Connectors |
| 745 |
$400 |
Galvanized Corrugated Pipe
and Connectors |
